100% Nickel

StripDatasheet

Datasheet updated 2024-06-28 09:13 (supersedes all previous editions)

Disclaimer: Recommendations are for guidance only, and the suitability of a material for a specific application can be confirmed only when we know the actual service conditions. Continuous development may necessitate changes in technical data without notice. This datasheet is only valid for materials under the trademark Kanthal^®.

100% pure nickel is ideal for use as an intermediate layer in the production of bimetals

Chemical composition

	Si %	Fe %	Mn %	Ni %
Nominal composition
Min				99.2
Max	0.2	0.25	0.3	-

Mechanical properties

Thickness	Yield strength	Tensile strength	Elongation
	R_p0.2	R_m	A
mm	MPa	MPa	%
1.0	160	400	35

Physical properties

Density g/cm³	8.9
Electrical resistivity at 20°C Ω mm²/m	0.09

Temperature factor of resistivity
Temperature °C	20	100	200	300	400	500	600
Ct	1.00	1.40	2.08	2.97	3.81	4.23	4.65

Coefficient of thermal expansion
Temperature °C	Thermal Expansion x 10^-6/ K
20 - 100	13.3

Thermal Conductivity
Temperature °C	100
W m^-1 K^-1	70

Specific heat capacity
Temperature °C	20
kJ kg^-1 K^-1	0.48

Melting point °C	1450
Max continuous operating temperature in air °C	1000
Magnetic properties	The material is magnetic.

Send PDF via email

Email address (Required)

Optional message