558 hits
558 hits on ”all pages” in entire website
Nickel DH is a nickel alloy (Ni alloy) with a minimum nickel content of 99.2 % suitable for use at temperatures up to 600°C (1100°F). Typical applications for Nickel DH are lamp filaments filters and many industrial and laboratory equipment where there is need for good corrosion resistance.
Ni 99,6 is a pure nickel alloy (Ni alloy) with a controlled carbon content of max. 0.02%. Due to its very low impurity content the resistivity is 0.08 Ω mm2/m. Ni 99,6 is suitable for hard vacuum applications A pure nickel alloy (Ni alloy) with a controlled carbon content of max. 0.02%.
Nifethal® 36 is an austenitic nickel-iron alloy (NiFe alloy) with very low thermal expansion factor up to 180°C (356°F). The alloy is characterized by good mechanical resistance, ductility and malleability combined with corrosion resistance. Nifethal® 36 is magnetic
Nikrothal® 40 Wire Nikrothal® 40 wire is an austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1100°C (2010°F). The alloy is characterized by high resistivity and good oxidation resistance. It has good ductility after use and excellent weldability. Typical
Nikrothal® 20 is an austenitic nickel-chromium alloy (NiCr alloy) for use at temperatures up to 1050°C (1920°F). The alloy is characterized by high resistivity and moderate oxidation resistance. It has good ductility after use and excellent weldability. Typical applications for Nikrothal®
Cuprothal® 5 is a copper-nickel alloy (CuNi alloy) with low resistivity for use at temperatures up to 300°C (570°F). Cuprothal® 5 is typically used for low-temperature applications such as heating cables in electric blankets and pillows. A copper-nickel alloy (CuNi alloy) with
Thermothal® N is an austenitic nickel alloy (Ni alloy) used for the negative leg of thermocouples type K. Thermocouples type K have a good resistance to oxidation and better than other combinations of thermocouples. Thermothal N can not be exposed to atmospheres containing sulphur gases.
Cuprothal® 49 Wire Cuprothal® 49 wire is a copper-nickel alloy (CuNi alloy) characterized by high electrical resistance, high ductility and good corrosion resistance. It is suitable for use at temperatures up to 600°C (1110°F). Typical applications for Cuprothal® 49 are
Thermothal® P is an austenitic nickel-chromium alloy (NiCr alloy) used for the positive leg of thermocouples type E or type K. Thermocouples of type K have good resistance to oxidation, and better than other base metal combinations. Thermocouples of type E have the largest emf output of any
Go to page:Previous, 1, …, 45, 46, 47, 48(This page), 49, 50, 51, …, 56Next
